Low-voltage ESS

JN-ES-LFP48V100-BG

51.2 V / 100 Ah / 5.12 kWh

A space-conscious 5.12 kWh wall-mounted LiFePO₄ battery for 48 V residential, small commercial and retrofit systems.

Product values shown here are based on the supplied product knowledge base. Confirm the latest technical sheet, model revision and destination-market requirements before quotation or installation.

51.2 VJN-ES-LFP48V100-BG Wall-mounted home battery
Nominal energy5.12 kWh
Nominal voltage51.2 V
Nominal capacity100 Ah
Continuous currentUp to 100 A
01

Wall-mounted format saves valuable floor space

02

48 V architecture for common home energy systems

03

LCD display with intelligent BMS status visibility

04

Parallel expansion and OEM private-label support

Product film

See the product
before the system review.

The supplied product video is published at its original 1280 × 720 resolution and loaded only when requested.

Inside a complete energy system

Designed to work as part of the whole.

Battery energy, inverter power, solar input, backup circuits and installation conditions must be matched before a project is released.

Residential rooftop solar panels
01 · GENERATERooftop solarPV energy enters the system
Illustrative hybrid inverter direction
02 · CONVERTHybrid inverterPower conversion and control
JN-ES-LFP48V100-BG energy storage product
Current product03 · STOREJN-ES-LFP48V100-BGEnergy stored for later use
Solar home illuminated in the evening
04 · SUPPLYHome loadsPriority circuits and daily use

Illustrative energy path · final design requires technical review

Product direction

Wall-mounted home battery.
Ready for the next review.

A space-conscious 5.12 kWh wall-mounted LiFePO₄ battery for 48 V residential, small commercial and retrofit systems. The final selection should consider load priority, required runtime, battery and inverter compatibility, protection settings, installation space and local market rules.

  • Wall-mounted format saves valuable floor space
  • 48 V architecture for common home energy systems
  • LCD display with intelligent BMS status visibility
  • Parallel expansion and OEM private-label support
Typical applications

Match the format
to the site.

01Home solar backup
02Small retail and commercial loads
03Solar retrofit
04EPC residential projects
05Lead-acid replacement
Technical data

Technical specifications.

Review the supplied values below before quotation, compatibility review or installation.

Nominal energy5.12 kWh
Nominal voltage51.2 V
Nominal capacity100 Ah
Continuous currentUp to 100 A
Cycle life3,000 cycles ≥80% initial capacity
Charge / cutoff58.4 V / 40.0 V
TemperatureCharge 0–55°C · discharge −20–55°C
ExpansionParallel supported · series not supported
Technical resources

One model. One verified document set.

Current records are supplied on request for JN-ES-LFP48V100-BG. Confirm the revision and destination market.

Request current datasheet REQUESTCheck inverter compatibility REQUESTAsk for installation guidance REQUEST

Is JN-ES-LFP48V100-BG right for this project?

Share the destination market, essential loads, target backup time and inverter information. Juneng will help your installer validate the product direction.

Build a project brief